Keyence fiber optic measuring amplifier

unused stock
Fiber optic measuring amplifier cable version, main unit, PNP
Model

FS-M1P

Type

Main unit

Output radiation

PNP

Light source

Rote LED

Sensitivity adjustment/mode selection

Trimmer with 8 revolutions (with display), FINE/TURBO (selector switch)

response time

250 µs (FINE) /500 µs (TURBO)

Operating mode

LIGHT-ON/DARK-ON (Wahlschalter)

Signal lamp

Output: Red LED, Stable operation: Green LED

Timer Function

ON delay: 40 ms / OFF delay: 40 ms / Timer OFF (selector switch)

Entrance

-

Control output

PNP open collector, max. 100 mA (max. 40 VDC), residual voltage: max. 1 V

Stability output

PNP open collector, max. 50 mA (max. 40 VDC), residual voltage: max. 1 V*1

Protection circuits

Reverse polarity protection, over-current protection, over-voltage protection

Expansion unit

Up to 16 expansion units can be connected to a single main unit (17 units in total).*2

Mutual interference suppression

FINE : 4, TURBO/SUPER: 8

Nominal values

Supply voltage

12 to 24 VDC ±10%, ripple (S-S) 10% or less

Power consumption

35 mA or less

Environmental resistance

Ambient light

Incandescent lamp: maximum 10,000 lux, sunlight: maximum 20,000 lux

Ambient temperature

-10 to +55°C (No freezing)*3

Relative humidity

35 to 85% RH (No Condensation)

Vibration resistance

10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in the X, Y and Z directions

Shock resistance

500 m/s2, 3 times each in the X, Y and Z directions

Housing material

Polycarbonate

Weight

Approximately 75g