Keyence photoelectric sensor with built-in measuring amplifier PZ-G101P

unused stock
Photoelectric sensor with built-in measuring amplifier
Rectangular reflective cable type, PNP
Model
PZ-G101P
Type
Diffuse-reflective
Narrow vision reflecting
execution
Rectangular
Output radiation
PNP
Cable connection
Cable (2m) *1
Messabstand
200 mm
Light spot diameter
Approx. 5 mm DM (At a detection distance of 100 mm)
Light source
Rote LED
Sensitivity setting
Trimmer with 1 turn (230°)
response time
500 µs
Operating mode
Light ON/Dark ON switch
Displays (LED)
Output: Orange LED,
Stable operation: Green LED
Control output
Open collector output, max. 30V, max. 100mA, residual voltage: max. 1V
Protection circuit
Reverse polarity protection, overcurrent protection, voltage filter
Interference suppression
Up to 2 units
(with automatic frequency switching function)
Tightening torque
Rectangular models (mounting hole area): max. 0.5 Nm
Nominal values
Supply voltage
10 to 30 VDC, including residual ripple (S-S) 10%
Power consumption
34 mA or less
Environmental resistance
Protection class
IEC: IP67/NEMA: 4A, 6, 12/DIN: IP69K
Ambient light
Incandescent lamp: max. 5,000 lux, sunlight: max. 20,000 lux
Ambient temperature
-20 to +55 °C (no freezing)
Relative humidity
35 to 85% RH (No Condensation)
Vibration resistance
10 to 55 Hz, double amplitude 1.5 mm, 2 hours each in the X, Y and Z directions
Shock resistance
1,000 m/s2, 6 times each in the X, Y and Z directions
Material
Housing, M18 nut (threaded models only)
Glass fiber reinforced PBT
Lens cover
Polyarylate (PAR)
Trimmer
Glass fiber reinforced polyamide (PA)
Cable (cable models only)
Polyvinylchlorid (PVC)

Plug (only plug version with cable)
-

Accesories
operating manual

Weight
Rectangular cable models: Approximately 60 g