Festo Compact Cylinder DNA-40-250-A-P-A

Party
needed
Compact cylinder
ADN-40-250-A-P-A
536288
Hub
250 mm
Kolben-Ø
40 mm
damping
elastic damping rings/plates on both sides
self-adjusting pneumatic end position cushioning
Installation position
any
Complies with standard
ISO 21287
Structural design
Pistons
Piston rod
Profilrohr
Position detection
for proximity switches
variants
EX protection approval (ATEX)
Metals with copper, zinc or nickel as the main component are excluded from use. Exceptions are nickel in steels, chemically nickel-plated surfaces, circuit boards, cables, electrical connectors and coils.
Increased mileage
Extended piston rod external thread
Special thread on the piston rod
Extended piston rod
With anti-twist device
High corrosion protection
Dust protection
Reinforced piston rod
Constant slow movement
Low friction
Continuous piston rod
Continuous, hollow piston rod
Heat-resistant seals max. 120 °C
Lasered type plate
Temperature range -40 to + 80 °C
one-sided piston rod
operating pressure
0.06 MPa ... 1 MPa
operating pressure
0.6 bar ... 10 bar
functionality
double-acting
CE mark (see declaration of conformity)
according to EU explosion protection directive (ATEX)
UKCA mark (see declaration of conformity)
according to UK EX regulations
Explosion protection
Zone 1 (ATEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 22 (ATEX)
ATEX Category Gas
II 2G
ATEX category dust
II 2D
Ex-ignition protection type gas
Ex h IIC T4 Gb
Ex-protection type dust
Ex h IIIC T120°C Db
Ex ambient temperature
-20°C <= Ta <= +60°C
Operating medium
Compressed air according to ISO 8573-1:2010 [7:4:4]
Note on the operating/control medium
Oiled operation possible (required for further operation)
Korrosionsbeständigkeitsklasse KBK
0 - no corrosion stress
2 - moderate corrosion stress
3 - strong corrosion stress
LABS compliance
VDMA24364-B1/B2-L
VDMA24364-Zone III
Suitability for the production of Li-ion batteries
Metals with more than 1% mass proportion of copper, zinc or nickel are excluded from use. Nickel in steels, chemically nickel-plated surfaces, circuit boards, cables, electrical connectors and coils are excluded
Ambient temperature
-40 °C ... 120 °C
Theoretical force at 0.6 MPa (6 bar, 87 psi), return
686 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), forward
686 N ... 754 N
Moving mass at 0 mm stroke
80 g
Additional moving mass per 10 mm stroke
9 g
Basic weight at 0 mm stroke
346 g
Weight surcharge per 10 mm stroke
37 g
Mounting type
optional:
with through hole
with internal thread
with accessories
Pneumatic connection
G1/8
Material note
RoHS konform
Material collar screws
Stahl
Material cover
Wrought aluminum alloy, anodized
Piston rod material
high-alloy steel
Cylinder tube material
Wrought aluminum alloy, slide anodized