Festo Standard cylinder DNC-40-1140-PPV-A-S6

Party
needed
Standard cylinder
DNC-40-1140-PPV-A-S6
163334
Hub
1140 mm
Kolben-Ø
40 mm
Based on standard
ISO 15552
damping
elastic damping rings/plates on both sides
Pneumatic damping adjustable on both sides
Installation position
any
Structural design
Pistons
Piston rod
Profilrohr
Position detection
for proximity switches
without
variants
with end position locking on both sides
with rear end position lock
with end position locking at the front
Increased mileage
Extended piston rod external thread
Internal thread on the piston rod
Special thread on the piston rod
Piston rod with external hexagon
Extended piston rod
Clamping unit on the piston rod
With anti-twist device
High corrosion protection
Dust protection
Constant slow movement
Low friction
Continuous piston rod
Continuous, hollow piston rod
Heat-resistant seals max. 120 °C
Temperature range -40 to + 80 °C
Monostable valve, mounted on the right, unactuated piston rod retracted
Monostable valve, mounted on the right, unactuated piston rod extended
Bistable valve, mounted on the right, unactuated piston rod retracted
Monostable valve, mounted on the left, unactuated piston rod retracted
Monostable valve, mounted on the left, unactuated piston rod extended
Bistable valve, mounted on the left, unactuated piston rod retracted
one-sided piston rod
Anti-twist device/guide
square piston rod
operating pressure
0.02 MPa ... 1.2 MPa
operating pressure
0.2 bar ... 12 bar
functionality
double-acting
CE mark (see declaration of conformity)
according to EU explosion protection directive (ATEX)
UKCA mark (see declaration of conformity)
according to UK EX regulations
Explosion protection
Zone 1 (ATEX)
Zone 1 (UKEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 21 (UKEX)
Zone 22 (ATEX)
ATEX Category Gas
II 2G
ATEX category dust
II 2D
Ex-ignition protection type gas
Ex h IIC T4 Gb
Ex-protection type dust
Ex h IIIC T120°C Db
Ex ambient temperature
-20°C <= Ta <= +60°C
Explosion protection approval outside the EU
EPL Db (GB)
EPL Gb (GB)
Operating medium
Compressed air according to ISO 8573-1:2010 [7:4:4]
Note on the operating/control medium
Oiled operation possible (required for further operation)
Korrosionsbeständigkeitsklasse KBK
2 - moderate corrosion stress
3 - strong corrosion stress
LABS compliance
VDMA24364-B1/B2-L
VDMA24364-Zone III
Ambient temperature
-40 °C ... 120 °C
Impact energy in the end positions
0.2 J
Max. torque of the anti-twist device
1.1 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return
633 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), forward
633 N ... 754 N
Mounting type
with internal thread
with accessories
Pneumatic connection
G1/4
Material note
RoHS konform
Material cover
Aluminium die casting
coated
Cylinder tube material
Aluminium wrought alloy
smooth anodized