Festo Normzylinder DSNU-12-100-P-A-S2

Party
unused stock
Standard cylinder
DSNU-12- -
DSNU-12-100-P-A-S2
193988
Hub
100 mm
Kolben-Ø
12 mm
damping
elastic damping rings/plates on both sides
Pneumatic damping adjustable on both sides
Installation position
any
Complies with standard
CETOP RP 52 P
ISO 6432
Structural design
Pistons
Piston rod
Cylinder tube
Position detection
for proximity switches
variants
Increased chemical resistance
Extended piston rod external thread
Piston rod external thread shortened on one side
Extended piston rod
Clamping unit on the piston rod
Compressed air connection axial
with direct fastening
Compressed air connection across
With anti-twist device
High corrosion protection
Constant slow movement
Low friction
Continuous piston rod
Heat-resistant seals max. 120 °C
one-sided piston rod
Anti-twist device/guide
square piston rod
operating pressure
0.15 MPa ... 1 MPa
operating pressure
1.5 bar ... 10 bar
functionality
double-acting
CE mark (see declaration of conformity)
according to EU explosion protection directive (ATEX)
UKCA mark (see declaration of conformity)
according to UK EX regulations
Explosion protection approval outside the EU
EPL Db (GB)
EPL Gb (GB)
Explosion protection
Zone 1 (ATEX)
Zone 1 (UKEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 21 (UKEX)
Zone 22 (ATEX)
ATEX Category Gas
II 2G
ATEX category dust
II 2D
Ex-ignition protection type gas
Ex h IIC T4 Gb
Ex-protection type dust
Ex h IIIC T120°C Db
Ex ambient temperature
-20°C <= Ta <= +60°C
Operating medium
Compressed air according to ISO 8573-1:2010 [7:4:4]
Note on the operating/control medium
Oiled operation possible (required for further operation)
Korrosionsbeständigkeitsklasse KBK
2 - moderate corrosion stress
3 - strong corrosion stress
LABS compliance
VDMA24364-B1/B2-L
VDMA24364-Zone III
Ambient temperature
-20 °C ... 120 °C
Impact energy in the end positions
0.07 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), forward
51 N ... 68 N
Mounting type
with accessories
Pneumatic connection
M5
Material note
RoHS konform
Material cover
Aluminium wrought alloy
Material seals
NBR
TPE-U(PU)
Piston rod material
high-alloy stainless steel
Cylinder tube material
high-alloy stainless steel